Call For A Free Quote: (514) 296-3454
Spilled water on your MacBook screen? Looking for ways to get water out of a MacBook screen? Water spillage can lead to an unresponsive keyboard and trackpad and can even cause an automatic shutdown. There’s no need to worry. These types of accidents happen more often than you think. Here, we have the most efficient ways to help you get water out of a MacBook screen:
Here is what you can do:
Safety should be the top priority. So if you ever spill water on your MacBook and notice that your MacBook refuses to charge, you need to switch it off immediately. Damage to the computer screen, CPU, and several other vital circuits can be limited by switching off the computer. Don’t worry about the unsaved files on your computer. The sooner you turn your computer off, the safer your data will be. Keep it turned off for at least 48 hours.
You can save your water-damaged MacBook by tilting and draining it. Simply tilt your MacBook in a direction that allows the excess water to drip off. Do not lean it backward, as this may cause the water to enter the internal components. Do Not leave the MacBook to drain in a tent position if you have a retina display. Instead, you can drain water safely by positioning your MacBook carefully in a 90-degree position against a table edge, with the screen facing down.
Absorb the liquid that has been spilled on your MacBook screen. For this purpose, you can use a clean microfiber towel. Carefully wipe down the MacBook screen and other affected areas. Avoid rubbing with a hard hand; you may cause scratches or further damage to your MacBook.
Air drying the wet MacBook screen is also an effective solution. Find a clean spot and allow your MacBook to dry undisturbed for at least 48 hours. Place the laptop in a 90-degree position, with the screen flat against the surface. Ideally, the keyboard should hang over the edge. This position allows the MacBook to dry efficiently and keeps the water away from the motherboard and other vital components of the computer. Remember not to disturb the drying process before the 48 hours are over!
If water somehow gets inside, you should use absorbent materials to remove moisture from the wet MacBook screen. Place a clean, dry cloth on the screen and gently press down to soak up the water. Be extra careful around vent holes to prevent liquid from entering them! For areas like vent holes, USB ports, charging ports, Thunderbolt ports, and HDMI ports, use cotton swabs to absorb any trapped liquid. Additionally, place cotton fabric under the MacBook to absorb any liquid on the bottom without turning it over.
Only turn on your MacBook when you’re sure all the water inside has dried out. After allowing the MacBook to dry completely, examine the screen and other components for any remaining moisture or signs of damage. If everything appears dry and undamaged, carefully power on the MacBook and test its functionality. Pay close attention to the screen for any abnormalities, such as dead pixels, discoloration, or erratic behavior.
If you still have water under your MacBook screen, or if moisture is present in the logic board, it is better to get the help of a professional. You can get in touch with us at Mobile Montreal for a quick repair. Proper professional treatment is the only way to ensure that there will be no problems in the future. But at the very least, following this guide can significantly reduce the repair cost!
Turn your MacBook upside down and place it on a towel or microfiber cloth. For best results, allow at least 24 hours for your MacBook to air dry fully.
Yes, it can be fixed, but the cost and reliability of that repair depend on the extent of the damage and the model of your MacBook.
Water damage, if not treated properly, can cause permanent system failure. It is best to treat the computer with appropriate methods by taking professional help to extend its life and avoid permanent damage.
